询问
请留言
Why Do Aluminum Parts Often Have Small Black Spots or “Fixture Marks” After Anodizing? How Should Manufacturers and Customers Understand Each Other?
Industry News

Why Do Aluminum Parts Often Have Small Black Spots or “Fixture Marks” After Anodizing? How Should Manufacturers and Customers Understand Each Other?

2026-09-21

Why Do Aluminum Parts Often Have Small Black Spots or “Fixture Marks” After Anodizing? How Should Manufacturers and Customers Understand Each Other?

In the field of precision CNC machining, anodizing can be considered the process of giving aluminum parts a “protective and attractive outer layer.” Whether the goal is to improve wear resistance, corrosion resistance, or appearance, anodizing is often an important finishing process.

However, when customers receive anodized aluminum parts, they may sometimes notice small black spots, localized color variations, fixture marks, contact marks, or other minor surface imperfections.

At this point, customers may naturally think: “There is a problem with the machining,” or “The anodizing was not done properly.”

In reality, anodizing is a comprehensive process involving the material itself, CNC machining, surface preparation, racking methods, current distribution, anodizing parameters, coloring, and appearance requirements. Some surface imperfections do not necessarily mean that the part has a dimensional or functional problem.

Today, let’s take a closer look at those troublesome “fixture marks” and small black spots that can occur during aluminum anodizing—and how manufacturers and customers can better understand the process and work together.

1. Why Are “Fixture Marks” Difficult to Avoid During Anodizing?

Some customers may think:

“If the entire part is being surface treated, shouldn’t the entire 360° surface be flawless?”

However, as long as anodizing is involved, fixture marks cannot be completely avoided.

It is determined by the anodizing process itself

Anodizing is essentially an electrochemical process. The aluminum part must be securely held by a metal fixture, typically made of titanium or aluminum, and electrically connected while being immersed in various cleaning, etching, anodizing, and coloring tanks.

Electrical conductivity is required

Without a contact point, the part cannot conduct electricity, and the anodizing film cannot form properly.

Therefore, the area where the fixture contacts the part will not be anodized or colored in the same way as the surrounding surface.

Although fixture marks cannot be completely eliminated, an experienced surface treatment supplier can minimize their visual impact through proper process control.

Optimize the fixture location

During production planning, the manufacturer can communicate with the customer or carefully review the drawing to determine the best fixture location.

Whenever possible, fixture marks should be placed on non-cosmetic surfaces, inside holes or threaded holes, or on hidden areas of the part.

Minimize the contact area

More precise point-contact fixtures can also be used to reduce the contact area and make the fixture mark as small and inconspicuous as possible.

593a73ad5b482fbc49d1260652d64260.jpg


2. Where Do Those Troublesome “Small Black Spots” Come From?

In addition to fixture marks, very small black spots or stains may occasionally appear on the surface of anodized aluminum parts.

There are several possible causes.

Material-related factors

Common aluminum alloys such as 6061 and 7075 contain various alloying elements. Depending on the material and manufacturing process, localized compositional variations, intermetallic particles, or other material-related features may become more visible after chemical pretreatment and anodizing.

This can sometimes appear as tiny dark spots or localized discoloration.

Chemical residue in blind holes or deep holes

Parts with threaded blind holes or deep holes can be more difficult to clean thoroughly.

Water or processing chemicals may remain inside these areas. If the residual liquid is not properly removed, it may later seep out during drying or subsequent processing, potentially causing stains, discoloration, or localized surface marks.

Dust and contamination in the production environment

Anodizing and pretreatment involve chemical solutions and controlled production environments. If environmental cleanliness is not properly controlled, fine particles or contaminants may settle on the surface during processing and become visible after anodizing.

For appearance-critical parts, maintaining a clean production environment and controlling the entire process are therefore important.


3. How Can Manufacturers and Customers Build a Better Understanding?

From the customer's perspective, it is completely reasonable to expect a high-quality appearance from a custom-made part.

From the manufacturer's perspective, however, aluminum's material characteristics and the nature of electrochemical surface treatment mean that achieving an absolutely flawless surface in every area is extremely difficult in industrial production.

To avoid misunderstandings and unnecessary disputes, both sides should establish clear expectations before production.

Clearly define cosmetic and non-cosmetic surfaces

When releasing a drawing, customers should clearly indicate which surfaces are critical cosmetic surfaces and which surfaces are less important.

For example, the main visible surface can be identified as the A-surface, while the bottom or hidden surfaces can be defined as B-surfaces or non-cosmetic surfaces.

This allows the manufacturer to design the racking method accordingly and keep fixture marks and other minor surface imperfections away from critical cosmetic areas whenever possible.

Establish a reasonable appearance acceptance standard

For applications with particularly strict appearance requirements, such as consumer electronics, high-end photographic accessories, or cosmetic components, it is often more effective to agree on an approved limit sample before mass production.

Both parties can inspect the physical sample and agree on what level of surface imperfection is acceptable.

For example:

“Imperfections within this reference sample are acceptable; anything exceeding this standard is considered nonconforming.”

This can significantly reduce misunderstandings and disputes during mass production.

Choose a supplier that understands the manufacturing process

A capable manufacturer should do more than simply produce the parts.

Ideally, the supplier should be involved during the drawing and DFM review stage and identify potential issues in advance—for example, areas where chemicals may become trapped, surfaces that are difficult to rack, or features that may affect the anodizing appearance.

By identifying these issues at the design stage, many problems can be prevented before production begins.

47c3727916b8cc4696543a25a232208.jpg


Conclusion

CNC machining and surface finishing are not simply about machines and production lines. They are manufacturing processes that require a balance between customer requirements, material characteristics, and process limitations.

Every successful delivery depends not only on the manufacturer's attention to detail, but also on the customer's understanding of the realities of industrial manufacturing.

If you have precision aluminum parts with strict requirements for appearance, dimensional tolerances, or surface treatment, and you are looking for a reliable manufacturing partner, feel free to send us your drawings.

We can provide high-precision CNC machining as well as complete and reliable surface finishing solutions to meet your application requirements.