Why Are Injection Molding Tolerances Different? A Guide to Plastic Part Dimensional Accuracy
A common question is: Why can't injection molded plastic parts simply use the same tight tolerances as CNC machined metal parts?
The main reason is that injection molding does not directly cut the finished part to its final dimensions. Instead, molten plastic is injected into a mold cavity and then cooled and solidified. During this process, material shrinkage, temperature, molding conditions, material properties, and mold design can all affect the final dimensions.
1. Plastic Shrinkage Affects Final Dimensions
One of the most important factors in injection molding is material shrinkage.
Plastic expands when heated and contracts as it cools. Therefore, the final dimensions of a molded part may differ from the dimensions of the mold cavity.
For example, if a mold cavity is designed around a nominal dimension of 100 mm, the finished plastic part may measure slightly less than 100 mm after cooling.
Different plastics have different shrinkage characteristics. Materials such as ABS, PC, ASA, PA, POM, and PP can behave differently during molding.
Therefore, mold designers need to consider the material's expected shrinkage when designing the mold.
2. Different Areas of the Part May Shrink Differently
Shrinkage is not always uniform throughout an injection molded part.
During injection, plastic flows from the gate through the mold cavity. Different areas may experience different filling pressures, cooling rates, and flow conditions.
This can result in:
- Dimensional variation
- Warpage
- Part deformation
- Hole position deviation
- Uneven shrinkage
- Changes in flatness
For long or complex components, the difference between dimensions near the gate and dimensions farther away from the gate can become particularly important.
This is one reason why dimensional tolerances and geometric tolerances for injection molded parts need to be evaluated according to the part's design and molding conditions.
3. Temperature Has a Significant Influence
Plastic materials are generally more sensitive to temperature changes than metals.
The dimensions of a plastic component can change with temperature, which means that the measurement temperature can influence the inspection result.
For precision plastic components, manufacturers should consider factors such as:
- Measurement temperature
- Material grade
- Cooling conditions
- Moisture content
- Part conditioning
- Storage environment
For example, materials such as polyamide (PA) can absorb moisture from the environment, which may influence dimensional stability.
Therefore, dimensional inspection should be performed under controlled and clearly defined conditions when tight tolerances are required.
4. Material Selection Influences Tolerance Capability
The selected plastic material has a direct influence on dimensional stability.
Common injection molding materials include:
- ABS
- PC
- ASA
- PA
- POM
- PP
- PC/ABS
- Glass-fiber reinforced plastics
The situation becomes more complex when reinforced materials are used.
For example, glass-fiber-reinforced PA may have different shrinkage behavior in the flow direction and transverse direction. This can influence both dimensional accuracy and warpage.
Therefore, material selection should be considered together with the required dimensional tolerances.
5. Mold Accuracy Does Not Equal Part Accuracy
Another important point is that high-precision mold machining does not automatically mean that the molded part will have the same level of dimensional accuracy.
The final dimensions of an injection molded component are influenced by several factors:
Mold dimensions + material shrinkage + injection parameters + cooling conditions + part deformation
Injection molding parameters such as injection pressure, holding pressure, melt temperature, mold temperature, cooling time, and cycle conditions can all affect the final result.
For this reason, injection molding requires not only a precise mold but also a stable and repeatable manufacturing process.
6. Not Every Injection Molded Dimension Needs a Tight Tolerance
When designing a plastic component, it is important to distinguish between general dimensions and critical functional dimensions.
For example, a non-critical external dimension may be specified with a relatively larger tolerance, while a locating hole or mating feature may require tighter dimensional control.
If an injection molded component requires an extremely tight tolerance, additional measures may be necessary, such as:
- Higher-precision mold manufacturing
- Improved process control
- Material conditioning
- Additional inspection
- Mold modification after trial runs
- Secondary CNC machining for critical features
Using unnecessarily tight tolerances on every dimension can increase tooling cost and manufacturing difficulty without providing additional functional value.
7. ISO 20457 and Injection Molded Part Tolerances
For plastic molded components, ISO 20457 is an important reference for dimensional tolerances and general requirements for molded plastic parts.
Injection molded parts should not simply be evaluated using the same tolerance approach commonly used for CNC-machined metal components.
When determining an appropriate tolerance, manufacturers should consider:
Material + nominal dimension + molding process + part geometry + functional requirements
A suitable tolerance should be technically achievable while still meeting the functional requirements of the component.
8. How to Improve Dimensional Stability in Injection Molding
For precision injection molded parts, dimensional stability can be improved through coordinated control of the entire manufacturing process.
At PANS, we recommend considering the following factors during the development stage:
Material Selection
Select a suitable plastic grade according to strength, temperature resistance, chemical resistance, dimensional stability, and application requirements.
Mold Design
Gate location, cooling system, draft angles, wall thickness, ribs, bosses, and parting lines can all influence molding performance.
Process Optimization
Injection pressure, holding pressure, melt temperature, mold temperature, cooling time, and cycle parameters should be optimized and maintained consistently.
Prototype and Mold Trials
Trial molding helps identify shrinkage, warpage, dimensional deviation, and other potential issues before mass production.
Dimensional Inspection
Critical dimensions should be inspected according to the drawing requirements and agreed inspection conditions.
Conclusion
Injection molding tolerances are more complex than CNC machining tolerances because material shrinkage, temperature, material properties, and molding conditions can all affect the final dimensions.
At PANS, we support customized plastic manufacturing projects from drawing review and material selection to mold development, injection molding, dimensional inspection, and production.
Have a plastic component that requires precision injection molding? Send us your drawings and requirements for a manufacturing evaluation and quotation.










