询问
请留言
How to Measure Threads: A Guide to Thread Diameter, Pitch and Inspection
Industry News

How to Measure Threads: A Guide to Thread Diameter, Pitch and Inspection

2026-09-23

How to Measure Thread Diameter

For an external thread, the major diameter can be measured with a caliper or micrometer. This measurement is taken across the largest diameter of the threaded section, from crest to crest.

For internal threads, specialized gauges or measuring equipment are normally required. The nominal thread size shown on a drawing should not be confused with the actual measured diameter, because manufacturing tolerances affect the final dimensions.

How to Measure Thread Pitch

Thread pitch is the distance between corresponding points on adjacent threads. Metric threads normally specify pitch in millimeters. For example, M10 × 1.5 indicates a nominal diameter of 10 mm and a pitch of 1.5 mm.

Imperial threads are commonly specified by TPI, or Threads Per Inch. For example, 3/8"-16 indicates a nominal thread size of 3/8 inch and 16 threads per inch.

A thread pitch gauge is one of the simplest tools for identifying thread pitch. Another method is to measure several thread intervals and calculate the average distance between them.

OIP-C

Why Use Thread Gauges?

Measuring diameter and pitch alone may not fully confirm whether a thread meets the required specification. Thread gauges can be used to check the thread form and functional fit.

Common inspection tools include thread plug gauges for internal threads and thread ring gauges for external threads. Depending on the application, additional dimensional inspection may also be required.

Before manufacturing a custom threaded component, it is important to confirm the thread standard, nominal size, pitch or TPI, tolerance class and other drawing requirements.

Accurate thread measurement helps manufacturers identify existing components, select suitable tooling and verify finished parts before assembly or shipment.